WS2812B Individually Addressable RGB LED Strip Light 5050 SMD 150 Pixels Dream Color Waterproof IP67 Black PCB 5V DC

  • 256 brightness display and 24-bit color display. Each pixel can have its own color and brightness. You can control them individually and set them to any color or animation you want.
  • Work great with Arduino, ready-to-go library, FastLED library and Raspberry Pi, etc. It’s very easy to program.
  • Covered with clear silicone weatherproof sheathing, which protects it very well and makes it easy to clean. It comes with silicone clips and screws. You can fix it on some place you want.
  • It comes with 3pin JST-SM connectors and separated power/ground wires on both ends. Each LED can be cut off without damaging the rest strip. You can shorten, lengthen or bend it freely if you want.
  • It can be used to make led screen, led wall, advertising board and widely applied to hotel, KTV, bars, Outdoor advertising signs, wedding party lighting, and so on.


  • Model: AL-WS2812B-150BK-WP
  • Light source: 5050 RGB LED
  • LED Qty: 30pcs per meter
  • Wave length (NM): R,620~625nm ; G,515~525nm; B,465~475nm
  • The gray level: 256
  • Color: full color (24-bit )
  • View angle:120°
  • Voltage: DC 5V
  • Power: 9W/M
  • Waterproof: Waterproof IP67
  • Dimension: 5000*12*4mm
  • Package: 16.4ft/roll
  • Life span:≥50000hrs
  • Port scanning frequency reaches to 2KHz/s
  • Data transmitting speed is up to 800Kbps
  • RGB order: Green/Red/Blue ( Please set up the controller before you use it. )
  • Red wire: 5V+ / Black Wire: GDN / Green wire: Data

Kindly note:

  • You must use a 5V DC power supply to power these strips, do not use higher than 6V or you can destroy the entire strip.
  • Power supply need to be selected according to the total power of LED Strip. We recommend to use 80% max power of power supply.
  • It is better to inject power between each 5 meters when connect them in series in case of voltage drop.
  • Led strip is made by 50cm FPCB, so there is a solder point each 50cm on strip. But this minor flaw has no any bad effect on the strip’s performance. In fact, most of the LED strips on the market are manufactured in half-meter lengths.


  • 1x 16.4ft 150 pixels WS2812B led strip (Power supply and controller are not included)
  • 1x Male 3PIN JST connector
  • 5x silicone clips
  • 10x mini screws