PRESSURE SENSOR 2000.40.101 2.5 BAR

Relative pressure transmitter with thick film on ceramic base technology. Output signal 4…20mA or 0…10Volt. The transmitter can be powered by the Pixsys controller. The steel housing, the 1/4″G or 1/4″ NPT thread and the DIN43650-A connector make field installation quick and easy.

2000.40.101 – ECT2.5 range 0…2,5 Bar ; 4…20mA

Code: ECT2,5

Category: Tags: , ,

Ideal for use with oleodynamic or hydraulic systems with pressures of up to 100 Bar that require high precision and repeatability. For pressures greater than 100 Bar, the NAT series is recommended as it doesn’t use O-ring seals and offers increased resistance to system over-pressure or pressure peaks with a wide range of fluids.

Sensor: Thick film on ceramic (Al2/O3)
Output: 4 … 20 mA (options at 0…10Volt)
Power supply: – 9…30Vdc 2 wires connection
Operating temperature: -25…+85°C
Accuracy at 25°C: +/- 0,3% on full scale (typ.)
Electrical connection: DIN43650-A
Process connection: 1/4″ G
Housing material: AISI316L
EMC emissivity: EN/IEC 61000-6-3/2
Sealing: IP65