- This is a plug-n-play desoldering iron. Plug in the power plug, allow the desoldering iron to preheat for approximately 3 minutes, and you are ready to go. YIHUA exclusive heating system combined with a strong desoldering pump ensures you experience uninterrupted desoldering.
- Different from the traditional use-and-throw desoldering irons, the 929D-V can be used, easily cleaned, and reused. You can lift and pull out the scrap solder storage tube and clean the solder out like a breeze. Meanwhile, we also included 2 different and interchangeable diameters (φ1.0mm & φ1.2mm) desoldering nozzles for different sizes of through-hole components. NOTE: change the nozzle after the desoldering iron has cooled completely.
- This desoldering iron comes with a heat deflector at the end of the heating element, and this prevents the excess heat from transferring onto the hand when desoldering continuously. You can desolder joints after joints without your hands feeling uncomfortably hot.
Product Description
One-Hand desoldering iron (with integrated desoldering pump)
YIHUA integrates a soldering iron with a desoldering pump for you to desolder joints continuously without jam! You can operate this iron single-handedly and desolder through-hole components and excess solder (solder bridge) from SMD boards with ease.
|
|
|
|
|---|---|---|
Single-Handed OperationWith this portable desoldering iron (Built-in soldering iron and desoldering pump), you can enjoy efficient and continuous single-handed desoldering |
No JamYIHUA exclusive heating system and solder extraction design ensure continuous desoldering without jam. This product contains electrical insulator protective material (mica), it is normal for the product to emit white fumes for no longer than 20 minutes on first use. This is a normal and intended occurrence for this product, please rest assure for safe usage. |
Remove excess solderTired of wasting solder wick on a large blob of solder? The 929D-V can remove excess solder on through-hole and SMD solder pads efficiently. |
|
|
|
|
|
|---|---|---|---|
Removable Storage ChamberThis desoldering iron comes with a removable chamber. You can lift and remove the tube to clean the scrap solder out easily. |
Desoldering NozzlesThe desoldering nozzle is interchangeable and we included 2 nozzles in the package. CAUTION: change nozzle only when the iron is cooled completely. |
Heat DeflectorThis deflector can reduce the uncomfortable heat from transferring to your hand when using the iron continuously. |
Heating IndicatorWhen the iron is connected to an electrical outlet (110V-127V ONLY), the heating indicator will turn ON to indicating the desoldering iron is heating up. |
|
|
|
|
|---|---|---|
Sufficient Pre-heatAllow the desoldering iron to preheat for approximately 3 minutes before desoldering to get a smoother desoldering experience. |
Resolder to DesolderOld PCBs may have a layer of dusts covering the solder joints, add fresh solder to the joint when desoldering to speed up the desoldering process. |
Keep it quickDon’t stay at the joint for too long to prevent damaging the solder pad, once the solder is completely melted, press the trigger to extract and take the iron away from the joint. |
