Model: AS946C
Supply voltage: 220 ± 10% VAC 110V
Heating body power: 800W
Temperature range: 50 ℃ ~ 350 ℃
Temperature display: 3 (display resolution: 1 ℃)
Temperature stability: ± 1.5 ~ ℃
Heating panel (mm): 200 * 200
Has many uses:
● Component heating operation
● SMD rework operation ● PCB disassembly and welding operation
● Physical and chemical container heating
● Other equipment or appliances heating
caveat
1, heating platform placed on the work platform, countertops to be smooth, the material must be heat-resistant.
2, in the work process, the plate and the surrounding is very hot, be careful operation, beware of burns, scalds!
3, the heated objects should pay attention to safety, the temperature is too high may damage the heating components.
4, prohibit the use of hot flammable and combustible objects in the vicinity.
5, to move or contact the machine, remember to cut off the power to be fully cooled to room temperature until the heating plate.
6, the machine is a hot electric products, such as do not use the machine remember to cut off the power, so as to avoid danger and accidents.
7, in order to extend the life of the heating element and the machine, prohibit the use of the machine for a long time at high temperature (above 300 ℃), under normal circumstances, the machine should not work continuously for more than eight hours.
Note
1, must ensure that the machine ground well.
2, do not let the air blow straight on the board surface, otherwise it will affect the heating heater
