BJ100-DDT

PHOTO ELECTRIC SENSOR NPN

Sensing type Diffuse reflective type
Sensing distance 100mm
Sensing target Opaque, Translucent material
Light source Infrared LED(850nm)
Response time Max. 1ms
Power supply 12-24VDC  ±10%(ripple P-P: max. 10%)
Current consumption Max. 30mA
Sensitivity adjustment Sensitivity adjuster
Operation mode Light ON/Dark ON(set by switch)
Control output NPN open collector
Connection type Cable type(Ø3.5, 2m)
Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination)
Environment_Ambient temperature -25 to 55℃, storage: -40 to 70℃
Protection structure IP65
Approval
Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH
Hysteresis(distance) Max. 20% of sensing distance
Material Case: Polycarbonate+Acrylonitrile butadiene styrene, LED Cap: Polycarbonate, Sensing part: Polymethyl methacrylate,
Bracket: SUS304(steel use stainless 304), Bolt: Steel chromium molybdenum, Nut: Steel chromium molybdenum,
Sleeve: Brass, Ni-plate
Accessories_Common Fixing bracket, M3 Bolts: 2, M3 Nuts: 2, Adjuster driver
Weight Approx. 70g (approx. 45g)

※Non-glossy white paper 100×100mm.
※M8 connector cable is sold separately. (cable – AWG22, Core diameter: 0.08mm, Number of cores: 60, Insulator out diameter: Ø1.25mm)
※The temperature or humidity mentioned in Environment indicates a non freezing or condensation.
※The weight includes packaging. The weight in parenthesis is for unit only.