6.Working temperature : -10’C – +60’C
7.Output way : Momentary. Toggle .Latched Adjusted by Jumper
8.Code type: Learning code Add Controller by the Learning Button on the receiver
9.PCB Size : 70*50*18mm
Output State:
It is adjusted by the Jumper on the Receiver Board,
A: Momentary———–Put the Jumper on 1 Pin or take away the Pin
B: Toggle————put the Jumper on “1&2”
C: Latched————- Put the Jumper on “2&3”
Momentary————Press the Transmitter button A, the receiver relay A is ON, release button A; the receiver relay A is OFF,
Toggle—————Press transmitter button A for 1 time , the receiver relay A is ON, press button A again, the receiver relay A is OFF,
Latched————Press transmitter button A, the receiver relay A is ON, Press transmitter button B, the relay A OFF.
Learning Code
Input AC220V for the Receiver ,the receiver power indicator ON, Press the Learning Button until the Led indicator OFF. Then press transmitter, the Led indicator flash for 3 times, it mean learning successfully.
Clearing Code
press the Learning Button and hold, the LED indicator from OFF to ON, it means clearing is successfully.