Dynamometer 12V 6W

First, select the installation position of the bicycle. (The generator is driven by the bicycle tires to generate electricity, which requires the generator friction wheel to be tightly attached to the bicycle tires. Usually, the generator has a spring switch to make the generator tightly attached in one direction.) We recommend installing it on the outer side of the front fork and the inner side of the rear fork of the bicycle, as shown in the picture. Pay attention to tightening several screws when installing the rear fork.

The front fork brake hole is installed on the car lights, and the grinding roller is installed on the right side of the front fork, with ultra-low resistance. The car lights can be turned on with a light finger twist. The manual switch is simple and exquisite, with a split structure. The car lights can also be installed in any position with corresponding brackets.

This is driven by the rolling friction of the bicycle tire to drive the generator, not the grinding wheel!!!

Code: 12V6W MOTOR