48H x 48W x 105D mm

24 to 230V AC/DC ± 15% 50/60 Hz, galvanic isolation 2.5 kV

8W

2 X LED displays: 4-digit white and 4-digit red

0-45°C, 35-95% RH

1 or 2 configurable analogue inputs selectable as:
Thermocouple type K, S, R, J, T, N, B(with automatic cold junction compensation -25 to 85°C, ± 0.2% of full scale ± 1 digit, 16 bit resolution)
Pt100, Pt500, Pt1000, Ni100, PTC1K, NTC10K (β 3435K)
Linear analogue signals 0 to 10 V (50000 points), 0/4 to 20 mA (40000 points), 0 to 60 mV (25000 points)
Potentiometer 1 to 150 kΩ (50000 points)
Sampling time (analogue inputs): Programmable from 2.1 ms (frequency up to 470 Hz)
2 or 4 digital inputs: Configurable for setpoint change, hold, run, tuning launch, start/stop, lock configuration
1 current transformer (CT) input: 50 mA, 800 µs – 4096 points

2 or 3 relays: 250 V AC, 5A, resistive change
2 SSR outputs: 12/24 V DC, 30 mA max
1 or 2 analogue outputs: Selectable 4 to 20 mA (40000 points ± 0.2% full scale) or 0 to 10 V DC (40000 points ± 0.2% F.S>) for command or retransmission PV/SPV
Serial communications (-T models): RS485 Modbus RTU Slave (4800 to 115200 baud)

ON/OFF with hysteresis, P, PI, PID, PD time proportional, manual or auto tuning

Absolute/ threshold, Band, High/Low deviation. Alarm with optional Manual reset. Loop Break Alarm.

IP54 front panel (IP65 with gasket), IP20 (housing and terminal blocks)

Password-protected parameters, optional memory card for repeat configurations, PC software, NFC configuration via MyPixsys app for Android smartphones