BEN300-DDT

PHOTO ELECTRIC SENSOR 12-24V DC

Sensing type Diffuse reflective type
Sensing distance 300mm
Sensing target Opaque, Translucent material
Light source Infrared LED(940nm)
Response time Max. 1ms
Power supply 12-24VDC  ±10%(ripple P-P: max. 10%)
Current consumption Max. 50mA
Sensitivity adjustment Sensitivity adjuster
Operation mode Light ON/Dark ON(set by switch)
Control output NPN, PNP open collector simultaneous output
Connection type Cable type(Ø5, 2m)
Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination)
Environment_Ambient temperature -20 to 65℃, storage: -25 to 70℃
Protection structure IP50
Approval
Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH
Hysteresis(distance) Max. 20% at sensing distance
Material Case, Case cover: Heat resistant Acrylonitrile butadiene styrene,
Sensing part: Polycarbonate(with polarizing filter: polymethyl methacrylate),
Bracket: Steel Plate cold commercial, Bolt: steel chromium molybdenum,
Nut: steel chromium molybden
Accessories_Common Adjuster driver, Fixing bracket, Bolts, Nuts
Weight Approx. 187g

※Non-glossy white paper 100×100mm.
※The weight includes packaging. The weight in parenthesis is for unit only.
※The temperature or humidity mentioned in Environment indicates a non freezing or condensation.

 

Photoelectric Sensor
Type AC/DC both support (BEN)
Sensing type Diffuse reflective
Sensing distance 300 mm
Power supply 12 – 24 VDC
Operation mode Light & Dark On
Control output NPN / PNP