|Gross Weight (kg)||0.02|
|Continuity Supply||We promise the long term continuity supply for this product no less than 10 years since 2015.|
|Display Format||128x64 Dots|
|Interface||I2C, 3-Wire Serial SPI, 4-Wire Serial SPI|
|IC or Equivalent||SSD1306|
|Appearance||Blue on Black|
|Dot (Pixel) Size||0.154x0.154mm|
|Dot (Pixel) Pitch||0.17x0.17mm|
|Touch Panel Optional||No|
|Contrast Ratio(Typ)||March 23, 1900|
|Viewing Angle Range||Left:80.0 , Right:80.0 , Up:80.0 , Down:80.0 degree|
|Backlight Current (Typ)||No|
|Power Supply(Typ)||3.3V, 5V|
|Supply Current for LCM(Max)||No|
O-LED Display Board 0.96 Blue SPI
The graphic OLED display module made of 128×64 blue OLED pixels with breakout board,diagonal is only 0.96 inch.The controller ic SSD1306, communicates via I2C/3-wire/4-wire serial interface.Thanks to breakout,the total pin number is only 7,typical power supply is 3.3V. Because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast,extremely wide viewing angle and extremely operating temperature.The fpc of OLED and pin header is already soldered on the breakout board,so no need any soldering job.
It’s easily controlled by MCU such as 8051,PIC,AVR,ARDUINO,ARM and Raspberry Pi.It can be used in any embedded systems,industrial device,security,medical and hand-held device.
Of course, we wouldn’t just leave you with a datasheet and a “good luck!” – we’ve written a full open source graphics library at the bottom of this page that can demonstrate colors, bitmap, scale, rotation, menu, graphic and text and arduino interfacing document to this oled display.